Insite i2 base unit.

Monitors and sends SMS / email alerts for:

• Temperature.
• Voltage.
• 8 switch inputs.
• 2 telemetry (ADC) channels.
• 6 Remote output channels.
• Built in WiPAN receiver.
• Optional built in GPS.
• Includes 12v charger.

Docking cradle For auto, marine and general purpose applications.

Provides screw terminals for all i2 functions:

• 8 switch inputs.
• 2 telemetry (ADC) inputs.
• 2 output relays (0.5 amp N.O. & N.C. contacts).
• 4 open collector output channels.
• 12V, 3.3v, 5v regulated, and standby battery supplies.
• Automotive battery telemetry calibration.
• DC charger socket

WiPAN magnetic door sensor & Sender

Built in magnetic reed switch senses doors & windows.

• Accepts external input via mono-jack.
• Wireless sensor link with i2 Base unit.
• Built-in magnetic switch sensor.
• Uses 2 x AAA Alkaline batteries for 1 year life.
• External contact input socket.
• Range approx 60 ft ( more in open areas).
• Fully supervised ( Low battery & off line alerts).

WIPAN Passive Infra Red Motion Sensor

Senses body heat in motion. Sends alarm and resets after 3 minutes of no activity.

• Wireless link or hardwire to i2 base unit.
• Senses intruders from body heat in motion.
• Intelligent reset after 3 minutes of no activity.
• Uses 2 x AAA alkaline batteries.
• Range approx 60 ft ( more in open areas).
• Fully supervised ( Low battery & off line alerts).
• FCC approved.

Wall mount and desk Stand Use if using all WiPAN devices or with custom cabling kits.

• Desk stand and wall mount for Insite base unit.
• Allows direct cable connection to insite.
• DC charger socket and internal solder strip..
• Use fixed cable to wire into custom applications.

WiPAN - Probe temperature sensor Monitors: High & low temps set by user. Probe on 3ft cable.

• Wireless link to i2 base unit.
• Temp range 14 deg F to 140 deg F (-10 to +60 C).
• User sets high limit and low limit.
• Digital LCD readout in degrees F or C.
• Uses 2 x AAA batteries.
• Fully supervised ( Low battery & off line alerts).

WiPAN - Flood and Spill sensor Monitors: Pooling of any liquid. Triggers when lip submerges.

• Senses as little as 2mm of pooling liquid.
• Works with any liquid, water, oil, acids etc.
• Does not use metal contacts which corrode.
• Wireless link or hardwire to i2 base unit.
• Uses WiPAN power source.
• Range approx 60 ft ( more in open areas).
• Fully supervised ( Low battery & off line alerts).

Isotropic Storm Wind sensor Monitors: Wind speed from all directions. Triggers at factory set speed.

• No moving external parts. No maintenance.
• Closes contact when wind speed is reached.
• Isotropic - works thro all wind directions.
• No batteries. Use with WiPAN sender or hardwire.

Anemometer and wind vane kit.

Monitors: Temperature, power, windspeed, sends telemetry readouts of wind direction and windspeed.
Consists of:

• Insite i2 and docking cradle.
• Wind SPEED sent by SMS & email in any units.
• Wind DIRECTION sent as 0 to 360 deg. readout.
• Can only be hardwired.
• Available seperately as anemometer and windvane.
• Wind speed has adjustable alarm set point.

"Home Minder" - Vacation Home kit.

Monitors: Temperature, power, refrigeration, flooding, intruders from body heat and motion. Consists of:

• Insite i2 base unit with WiPAN.
• Desk stand and charger.
• One WiPAN temperature sensor with probe.
• Two WiPAN flood and spill sensors.
• Two WiPAN PIR motion sensors.

Tower Light Monitoring kit.

Monitors: Temperature, Power, BEACON, MARKER and FLASHER lights. Consists of:

• Insite i2 base unit.
• Docking cradle.
• Tower light monitoring control board.
• One current transformer.
• DC chargers.

Click to enlarge

"Motor Home Minder" - kit.

Monitors: Temperature, power, intrusion, sends vehicle battery voltage telemetry, remote controls 2 circuits (eg GENERATOR).
Consists of:

• Insite i2 base unit and docking cradle.
• One WiPAN PIR sensor.
• One WiPAN door sensor.
• Two 30 Amp automotive relays and cables.
• DC charger.